Lenovo ThinkServer RD630 - Installing or Replacing a Hot-Swap Redundant Power Supply

5.RemovetheTPMinstalledontheTPMconnectorbyliftingitstraightup.
Note:CarefullyhandletheTPMbyitsedges.
Figure67.RemovingtheTPM
6.Ifyouhavelifteduptherisercardassembly1,reinstallitintothechassis.See“Replacingtheriser
cardassembly1”onpage137.
7.IfyouareinstructedtoreturntheoldTPM,followallpackaginginstructionsanduseanypackaging
materialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheremovalprocedure,goto“Completingthepartsreplacement”onpage162.
Installingorreplacingahot-swapredundantpowersupply
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiii
and“Guidelines”onpage71.
Chapter6.Installing,removing,orreplacinghardware109