8.Carefullyliftthebackplanestraightupalittlebitsothatthesmallhooks1onthechassisarealigned
withthecorrespondingholesinthebackplane.Then,slowlyandcarefullymovethebackplanetothe
rearofthechassisuntilthehooks1passthroughtheholesinthebackplaneandthencompletely
removethebackplaneoutofthechassis.
Figure98.Removingthebackplanefor3.5-inchharddiskdrives
9.Touchthestatic-protectivepackagethatcontainsthenewhot-swapharddiskdrivebackplanetoany
unpaintedsurfaceontheoutsideoftheserver.Then,removethenewbackplanefromthepackage.
Note:Carefullyhandlethebackplanebyitsedges.
10.Notetheorientationofthenewbackplaneandpositionitonthechassissothatthesmallhooks1on
thechassispassthroughthecorrespondingholesinthenewbackplane.Then,carefullypressthenew
backplanestraightdownsothatitissecuredinplacebythesmallretainingstuds
2onthechassis.
Figure99.Installingthebackplanefor3.5-inchharddiskdrives
134ThinkServerHardwareMaintenanceManual
To Next Page
Loading...
