Lenovo ThinkSystem HR650X - Page 45

©
Copyright
L
enovo
201
7
45
Recorder
Mode
Disabled/En
abled
With this mode enabled only text will be sent. This
is to capture Terminal data.
Resolution
100x31
Disabled/En
abled
Enables or disables extended terminal resolution
Legacy OS
Redirection
Resolution
80x24/80x2
5
On Legacy OS, the Number of Rows and Columns
supported redirection
Putty
KeyPad
VT100/LIN
UX/XTERM
R6/SCO/ES
CN/VT400
Select FunctionKey and KeyPad on Putty.
Redirection
After BIOS
POST
Always
Enable/Boo
tLoader
The Settings specify if BootLoader is selected then
Legacy console redirection is disabled before
booting to Legacy OS. Default value is Always
Enable which means Legaacy console Redirection is
enabled for Legacy OS.
One Blank line
Legacy Console Redirection
Legacy Console Redirection Settings
Legacy Console Redirection Settings
Legacy
Serial
Redirection
Port
COM0/CO
M1
Select a COM port to display redirection of Legacy
OS and Legacy OPROM Messages.
One Blank line
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
Disabled/
Enabled
Console Redirection Enable or Disable.
Console Redirection Settings The settings specify how the host computer and
the remote computer (which the user is using) will
exchange data. Both computers should have the
same or compatible settings.
Out-of-
Band Mgmt
Port
COM0/CO
M1
Microsoft Windows Emergency Management
Services (EMS) allows for remote management of a
Windows Server OS through a serial port.
Terminal
Type
VT100/VT1
00+/VT-
UTF8/ANSI
VT-UTF8 is the preferred terminal type for out-of-
band management. The next best choice is VT100+
and then VT100. See above, in Console Redirection
Settings page, for more Help with Terminal