Lenovo ThinkSystem HR650X - Page 64

©
Copyright
L
enovo
201
7
64
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Socket 1 PcieBr4D00F0 - MCP 0
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable
the
Link Speed Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Choose Link Speed for this PCIe port
Socket 1 PcieBr5D00F0
-
MCP 1
PCI-E Port Auto / Disable /Enable In auto mode the BIOS twill remove the EXP port if
there is no device or errors on that device and the
device is not HP capable. Disable is used to disable
the
Link Speed Auto
Gen 1 (2.5 GT/s)
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
Choose Link Speed for this PCIe port
Server Management Menu
Item
Option
Description
Server Management
BMC Self Test
Status
Read Only
Ok : Display PASSED
BMC Device ID
Read Only
Display BMC Device ID
BMC Device Revision
Read Only
Display BMC Device Revision
IPMI Version
Read Only
Display IPMI Version
One Blank Line
BMC Support
Enabled/Disabled Enable/Disable interfaces to
communicate with BMC
Wait For BMC
Enabled/Disabled Wait For BMC response for
specified time out. In PILOTII,
BMC starts at the same time
when BIOS starts during AC
power ON. It takes around 30
seconds to initialize Host to BMC
FRB
-
2 Timer
Enabled/Disabled Enable or Disable FRB-2
timer(POST timer)