Lenovo ThinkSystem HR650X - Page 67

©
Copyright
L
enovo
201
7
67
DNS Server1 10.0.0.90 Based on BMC setting
DNS Server2 10.0.0.91 Based on BMC setting
DNS Server3 0000:0000:0000:0000:00
00:0000:0000:0000
Based on BMC setting
System Event Log Table(Sub of
Server Management Menu
)
Enabling/Disabling Options
SEL Components Disabled/Enabled Change this to enable or disable all features of
System Event Logging during boot.
One blank line
Erasing Settings
Erase SEL No/Yes, On next
reset/Yes, On every reset
Choose options for erasing SEL.
When SEL is Full Do Nothing / Erase
Immediately
Choose options for reactions to a full SEL.
One blank line
Custom EFI Logging Options
Log EFI Status Codes Disabled/Both/Error
code/Progress code
Disable the logging of EFI Status Codes or log only
error code or only progress code or both.
One blank line
NOTE: All values changed here do not take effect
until computer is restarted.
Bmc self test log Table(Sub of
Server Management Menu
)
Bmc self test log
logs the report returned by BMC self test command
Log area usage =
02 out of 20 logs
One blank line
Erase Log
Yes, On every reset
/ No
Erase Log Options
When log is full Clear Log / Do not log
any more
Select the action to be taken when log is full
DATE
TIME
STATUS CODE
View FRU information(Sub of
Server Management Menu
)
View FRU information Press <Enter> to view FRU information.
FRU Information