Lenovo ThinkSystem HR650X - Page 68

©
Copyright
L
enovo
201
7
68
One blank line
System Manufacturer
Read Only Please refer to BMC FRU spec.
System Product Name Read Only Please refer to BMC FRU spec.
System Version Read Only Please refer to BMC FRU spec.
System Serial Number User can set serial number. Please refer to BMC
FRU spec.
Asset Tag User can set asset tag.Please refer to BMC FRU
spec.
Board Manufacturer
Read Only
Please
refer to BMC FRU spec.
Board Product Name
Read Only
Please refer to BMC FRU spec.
Board Version Read Only Please refer to BMC FRU spec.
Board Serial Number
Read Only
Please refer to BMC FRU spec.
Chassis Manufacturer Read Only Please refer to BMC FRU spec.
Chassis Product Name
Read Only
Please refer to BMC FRU spec.
Chassis Serial Number Read Only Please refer to BMC FRU spec.
System UUID
Read Only
Please refer to BMC FRU spec.
BMC network configuration Table(Sub of
Server Management Menu
)
BMC network configuration
**********************
Configure IPV4 support
**********************
One blank line
NCSI Switch Don't Change
OCP
MEZZ Card Type A
Riser1 Pcie Lan
NCSI Cable
LAN share: NCSI connects to on-board LAN.
SFP+ share: NCSI connects to on-board SFP+.
xAdd-on NIC share: NCSI connects to Ethernet
always show Unspecified. User can select one of
options. After reboot, it shows "Unspecified". The
result of setting is showing in NCSI current state.
NCSI current state
OCP share
get from BMC
One blank line
Lan channel 1
Configuration Address
source
Don't change
Static
DHCP
Select to configure LAN channel parameters
statically or dynamically(by BIOS or BMC).
Unspecified option will not modify
any BMC network parameters during BIOS phase