Current Configuration
DHCP
Station IP address Enter station IP address
Subnet mask Enter subnet mask
VLAN_ID
VLAN ID (12-bit), Range 0-4095, 0 if VLAN ID not
used. VLAN ID 0, 1, 4095 are reserved VLAN ID's.
One blank line
Configuration Address
source
Don't change
Static
DHCP
Select to configure LAN channel parameters
statically or dynamically(by BIOS or BMC).
Unspecified option will not modify
any BMC network parameters during BIOS phase
Current Configuration
DHCP
VLAN_ID VLAN ID (12-bit), Range 0-4095, 0 if VLAN ID not
used. VLAN ID 0, 1, 4095 are reserved VLAN ID's.
One blank line
**********************
Configure IPV6 support
Enable or Disable LAN1 IPV6 Support
Configuration Address
source
Don't change
Static
DynamicBmcDhcp
Select to configure LAN channel parameters
statically or dynamically(by BIOS or BMC).
Unspecified option will not modify any BMC
network parameters during BIOS