Onboard sSATA (for M.2 SATA
mode)
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during subsequent boots. Enable is
the default setting. [Auto] is removing the port if there is
no device or errors on that device.
Note: [Auto] is the setting for PCIe devices by CPU only.
Slot 1 (Display depending on
which riser card is installed)
• Auto
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during subsequent boots. Auto is the
default setting. [Auto] is removing the port if there is no
device or errors on that device.
Note: [Auto] is the setting for PCIe devices by CPU only.
Slot 2 (Display depending on
which riser card is installed)
• Auto
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during subsequent boots. Auto is the
default setting. [Auto] is removing the port if there is no
device or errors on that device.
Note: [Auto] is the setting for PCIe devices by CPU only.
Slot (n...) (Display depending on
which riser card is installed)
• Auto
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during subsequent boots. Auto is the
default setting. [Auto] is removing the port if there is no
device or errors on that device.
Note: [Auto] is the setting for PCIe devices by CPU only.
Onboard LAN (Display when
PHY card installed)
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during subsequent boots. Enable is
the default setting. [Auto] is removing the port if there is
no device or errors on that device.
Note: [Auto] is the setting for PCIe devices by CPU only.
Onboard LAN Port 1 (The
number of “Onboard LAN Port x”
varies with the PHY card.)
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during boot. Greyout when “Onboard
LAN” is [Disable]; Hidden when this port is not present.
Enable is the default setting.
Onboard LAN Port 2 (The
number of “Onboard LAN Port x”
varies with the PHY card.)
• Enable
• Disable
Disabling an entry will prevent the associated device from
being enumerated during boot. greyout when “Onboard
LAN” is [Disable]; Hidden when this port is not present.
Enable is the default setting.
Enable/Disable Adapter Option ROM Support
Item
Options
Description
Onboard SATA
• Auto
• Disable
• UEFI
• Legacy
Select whether UEFI or legacy option ROM of this device
will be executed. [Disable] means both UEFI and legacy
option ROM will not be executed. [UEFI] means only UEFI
option ROM will be executed. [Legacy] means only legacy
option ROM will be executed. [Auto] means option ROMs
will be executed based on “System Boot Mode”, UEFI or
legacy. When [Legacy] is selected, "Onboard Video" will
also be changed to [Legacy] automatically and cannot be
changed to other options. Auto is the default setting.
Onboard sSATA (for M.2 SATA
mode)
• Auto
• Disable
• UEFI
• Legacy
Select whether UEFI or legacy option ROM of this device
will be executed. [Disable] means both UEFI and legacy
option ROM will not be executed. [UEFI] means only UEFI
option ROM will be executed. [Legacy] means only legacy
option ROM will be executed. [Auto] means option ROMs
will be executed based on “System Boot Mode”, UEFI or
legacy. When [Legacy] is selected, "Onboard Video" will
also be changed to [Legacy] automatically and cannot be
changed to other options. Auto is the default setting.
Chapter 3. System configuration and boot management 11
To Next Page
Loading...
