Figure 15. Front operator panel with LCD display
The LCD display and the function buttons give you access to the following information:
Error messages
System VPD: machine type & mode, serial number, UUID string
System firmware levels: UEFI and XCC firmware
XCC network information: hostname, MAC address, IP address, DNS addresses
Environmental data: Ambient temperature, CPU temperature, AC input voltage, estimated power
consumption
System reset action
The front operator panel with LCD display can be ordered as listed in the following table.
Table 34. LCD system information display panel
Part number Feature code Description
None* AUMW Front operator panel with LCD display
* Only available configure-to-order or with predefined models
The server offers light path diagnostics. If an environmental condition exceeds a threshold or if a system
component fails, the XCC lights LEDs inside the server to help you diagnose the problem and find the
failing part. The SR860 has fault LEDs next to the following components:
Each processor
Each memory DIMM
Each drive bay
Each system fan
Each power supply
The front of the server also houses an information pull-out tab (also known as the network access tag). See
Figure 2 for the location. A label on the tab shows the network information (MAC address and other data)
to remotely access XClarity Controller.
System status with XClarity Mobile
To Next Page
Loading...
