LZV100 Command/Power Station 2
2
Welcome!
We would like to congratulate you on your acquisition of the
Digital plus by Lenz
®
system and we hope you will enjoy working
with this model-railway control system. Thank you for being our
new customer!
The purpose of this operating manual is to explain the use of the
system and its components. In order to proceed as quickly as
possible to the pleasure of operating your model railway with
DCC, begin by reading the section "First Steps". After you have
operated your first train you will be better able to follow the step by
step description of your system’s entire range of functions. It is
not necessary to understand or use all the system's features.
Select the set of features you are comfortable with and enjoy your
model railroad.
If you still have questions after reading this operating manual, for
which you can not find the answers, please contact us. We will be
happy to help. There are four different ways of contacting Lenz
Elektronik GmbH:
Europe North America
Postal
address:
Lenz Elektronik GmbH
Huettenbergstrasse 29
D-35398 Giessen
Lenz Agency
PO Box 143
Chelmsford, MA 01824
Phone ++49 (0) 6403 900 133 ++1 978 250 1494
Fax ++49 (0) 6403 900 155 ++1 978 455 LENZ
Email info@digital-plus.de support@lenz.com
Do you have everything?
Please check, to ensure that all the components of the LZV100
have been delivered:
LZV100 – Command Station/Power Station (Booster)
one 5- terminal, one 4 terminal and one 3-terminal green
connector attached to the rear of the LZV100
one 4-terminal black connector attached to the rear of the
LZV100
operating manual (this booklet)
If an item is missing, please contact your retailer to have the
missing item replaced.
In order to use the LZV100 you will also need an XpressNet
handheld and a suitable transformer for powering the LZV100.
To Next Page
Loading...
Need help?
General