LZV100 Command/Power Station 3
1 Important information — Please read first!
Your LZV100 command/power station is the central component of
your Digital plus by Lenz
®
system and was submitted to
intensive testing before delivery. Lenz Elektronik GmbH
guarantees fault-free operation if you follow the advice given
below:
) Do not connect the LZV100 to any device not addressed in
this manual. Even if other devices use the same connectors,
you must not operate the LZV100 with those devices. The
fact that the connectors are similar does not automatically
mean that you may use them for operation, even if you are
dealing with other model railroad control systems.
Do not expose the LZV100 to moisture or direct sunlight.
1.1 Notations and symbols:
Cross references:
(
Öp. 23)
This arrow points you to a particular page in this operation
manual, where you will find additional information about
the subject at hand.
Important notes:
) Text marked with this symbol and frame
contains especially important information and tips.
) If you have problems,
please first check this operation manual to see if you may
have missed a direction for use. The table of contents and
especially the section “Troubleshooting” will help.
To Next Page
Loading...
Need help?
General