Appendix
Accessories
8
66
EDB712 DE/EN 2.1
8 Appendix
8.1 Accessories
You can order the following accessories separately for drive controllers of type
712 E :
ƒ RFI filter
ƒ Power fuses
ƒ Fuse holder
ƒ Rotary knob and scale for setpoint potentiometer
ƒ Replacement resistor for operation with neutral conductor connected
ƒ Zinc oxide varistor (only on operation with a reversing contactor circuit)
Drive controller Quantity Type Art. no.
RFI filter
1
For load current ≤8A
For load current ≤10 A
EZF3_008A002
EZF3_012A001
Power fuses 3 FF 16A, 6.3 x 32 mm
super fast
305 725
Fuse holder 1 3-pole 330 269
Rotary knob 1 - 308 273
Scale 1 Graduations every 2 308 274
Zinc oxide varistor 3 S20K510 307 717
Replacement resistor for operation
with neutral conductor (pos. R420)
1 100 kΩ 324673
Resistors for modifying the mains
voltage range
(pos. R101 ... R103)
3 220 kΩ /0.5W On request