Lenze 9400

Lenze · E94AYCIB communication module (INTERBUS) · Communication Manual · DMS 4.0 EN · 02/2014 · TD17 43
9 Parameter data transfer
9.3 Supported PMS services
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.3.6 Identify
The P "Identify" MS service provides information on how to identify the inverter.
The inverter with the plugged-on communication module provides the following parameters for
this:
Example: Visible string "device type" (15 characters)
Example: Visible string "device version" (15 characters)
Parameter Type Description
Device manufacturer Visible string Company name "Lenze"
Device type Visible-string (15 characters) Device name for inverter and communication
module
Device version Visible-string (15 characters) Firmware version of the inverter and the
communication module
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
E 9 4 A F H B A F C I B
Character Description
1 ... 3 Product range of the inverter and the communication module ("E94" = 9400 series)
4Blank
5 ... 8 Firmware of the inverter (from C00200/0)
• Character 5: Version ("A" = 1st generation)
• Character 6 ... 8: Firmware version
• "FHB" = Servo Drive 9400 HighLine
• "FRB" = Servo Drive 9400 regenerative power supply module
• "VPB" = Servo Drive 9400 PLC
9Blank
10 ... 14 Firmware of the communication module (from C13900
/ C14900)
• Character 10: Version ("A" = 1st generation)
• Characters 11 ... 14: Firmware version
• "FCIB" = INTERBUS module
15 Blank
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 5 . 0 0 0 1 . 0 0
Character Description
1 ... 5 Firmware version of the inverter (from C00099/0 = "05.00.xx.yy", without internal revision status
["xx"] and build status ["yy"])
6Blank
7 ... 11 Firmware version of the communication module (from C13902
/ C14902 = "01.00.xx", without
internal revision status ["xx"])
12...15 Blank