Lenze 9400

13 Parameter reference
13.3 Parameters of the communication module for slot MXI2
64
Lenze · E94AYCIB communication module (INTERBUS) · Communication Manual · DMS 4.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14789
C14850
C14851
Parameter | Name:
C14789 | Service code
Data type: UNSIGNED_8
Index: 9786 = 0x263A
This code is for device-internal use only and must not be written to by the user!
Setting range (min. value | unit | max. value)
032
Subcodes Lenze setting Info
C14789/1 0 Service code
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14850 | All words to master
Data type: UNSIGNED_16
Index: 9725 = 0x25FD
Display of the process data words which are transmitted from the communication module to the master.
• In the subcodes 1 ... 32, all process data words to the master are displayed. Only the configured process data
words are valid.
Display area (min. value | unit | max. value)
0 65535
Subcodes Info
C14850/1
...
C14850/32
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14851 | All words from master
Data type: UNSIGNED_16
Index: 9724 = 0x25FC
Display of the process data words which are transmitted from the master to the communication module.
• In the subcodes 1 ... 32, all process data words to the master are displayed. Only the configured process data
words are valid.
Display area (min. value | unit | max. value)
0 65535
Subcodes Info
C14851/1
...
C14851/32
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT