Lenze CPC 9100 - 1 Safety Instructions; Definition of Notes Used

Safety instructions
Definition of notes used
1

40
LDCDS-CPC9100 DE/EN 1.0
1 Safety instructions
1.1 Definition of notes used
The following pictographs and signal words are used in this documentation to indicate
dangers and important information:
Safety instructions
Structure of safety instructions:
 Danger!
(characterises the type and severity of danger)
Note
(describes the danger and gives information about how to prevent dangerous
situations)
Pictograph and signal word Meaning
 Danger!
Danger of personal injury through dangerous electrical voltage.
Reference to an imminent danger that may result in death or
serious personal injury if the corresponding measures are not
taken.
 Danger!
Danger of personal injury through a general source of danger.
Reference to an imminent danger that may result in death or
serious personal injury if the corresponding measures are not
taken.
 Stop!
Danger of property damage.
Reference to a possible danger that may result in property damage
if the corresponding measures are not taken.
Application notes
Pictograph and signal word Meaning
 Note!
Important note to ensure troublefree operation
 Tip!
Useful tip for simple handling

Reference to another documentation
Special safety instructions and application notes for UL and UR
Pictograph and signal word Meaning
 Warnings!
Safety or application note for the operation of a UL-approved
device in UL-approved systems.
Possibly the drive system is not operated in compliance with UL if
the corresponding measures are not taken.
 Warnings!
Safety or application note for the operation o f a UR -approved
device in UL-approved systems.
Possibly the drive system is not operated in compliance with UL if
the corresponding measures are not taken.