Commissioning
Commissioning steps
7
EDK82ZAFSC−010 DE/EN/FR 6.1
45
H2_Inbetriebnahmeschritte−−−−(DUMMYSEITEVOR)−−−
Note!
The basic device is only functioning if a HIGH level is applied to X3/28
(controller release via terminal).
ƒ Please observe that the controller can be inhibited through various
sources. All sources act like a series connection of switches.
ƒ If the drive does not start in spite of the controller release via X3/28, check
if the controller inhibit is set via another source. Another source could be
the key of the keypad.
To Next Page
Loading...
