Need help?Do you have a question about the Lenze E84DGFCRFNP and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Manufacturer | Lenze |
| Input Voltage | 24 VDC |
| Protection Class | IP20 |
| Communication Interface | CANopen |
Explains how to set up the PROFINET master device for communication.
Details the process of assigning a unique name to the device on the network.
Guides on configuring IP address, subnet mask, and gateway for network communication.
Describes how to establish remote access and communication using the Lenze engineering software.
Explains how to access and map process data using Process Data Objects (PDOs).
Details the configuration of PDOs for data exchange between components.
Explains parameter transfer using the acyclic communication channel based on PROFIdrive.
Guides on how to retrieve parameter values from the inverter.
Guides on how to write parameter values to the inverter.
Describes how communication interruptions are detected and handled.
Details how to use the engineering software for diagnostics.
Offers a summary table of PROFINET error codes and their responses.
Lists common causes and solutions for various PROFINET error messages.
Lists parameters related to communication functions of the operating system.
Details parameters specifically used for PROFINET communication.
To Next Page