Need help?Do you have a question about the Lenze E84DGDVB3714 and is the answer not in the manual?
General| Manufacturer | Lenze |
|---|---|
| Model | E84DGDVB3714 |
| Protection Class | IP20 |
| Mounting | Wall mounting |
| Supply Voltage | 3 x 380-480 V AC |
| Control Type | Vector Control |
| Communication Interface | CANopen |
| Ambient Temperature Range | 0...+45 °C |
| Storage Temperature Range | -25...+70 °C |
| Relative Humidity | < 95 % (non-condensing) |
Outlines essential safety guidelines for Lenze controller installation and operation.
Provides safety guidelines specific to Lenze motors, covering installation and operation.
Details potential risks and hazards that may remain after safety measures are applied.
Presents detailed input, output, and power loss specifications for the device.
Specific safety requirements for installations compliant with UL and CSA standards.
Safety guidelines for UL/CSA installations in French.
Guidelines for installing the drive system to meet electromagnetic compatibility (EMC) standards.
Covers wiring of power and control connections for the device.
Pre-commissioning checks, tool selection, and notes for motor operation.
Steps for rapid setup, including general configuration and parameters.
Overview of the commissioning process using the keypad interface.
Details the use and selection of internal or external brake resistors.
Explains the importance and benefits of integrated drive-based safety functions.
Critical safety considerations for installation, operation, and risk analysis.
Details how safety functions like Safe Torque Off (STO) operate.
Wiring instructions for connecting the safety system components.
To Next Page
