Quick start guide 1
47
EDK94SH104 ZH/EN 5.1
1 Quick start guide
How to proceed for the installation:
1. Read the safety instructions from page 48
2. Mount the device from page 57
3. Wire the device from page 58
4. Adjust and wire the device modules
– Wire the communication modules.
– Adjust the memory modules.
– Wire the safety modules.
from page 69
5. Final works from page 84
Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
To Next Page
Loading...