Commissioning
7
MA DrivePLC DE/EN/FR 1.0
15
Tip!
l
The software “Global Drive Control Light” is included on the CD-ROM “Drive PLC
Developer Studio”.
l
The full version of “Global Drive Control” can be obtained from Lenze, with ordering
number ESP-GDC 1.
l
A description of parameterization with the keypad can be found in the instructions
that are supplied with every keypad.
l
The code table can be found in the Online-Help in Drive PLC Developer Studio (DDS).
Display of operating status
Two LEDs at the front of the instrument indicate the operating status of the Drive PLC:
Abb. 1-23
LED
Operating status
green red
x blinking Fault: TRIP
blinks at 0.5 second intervals off PLC program not loaded
off off PLC program loaded
on off PLC program running
blinking every second off PLC program loaded but paused
x LED state has no significance
To Next Page
Loading...
