ENGLISH
2
About these instructions
This documentation applies to the smd frequency inverter, and contains important technical data and
describes installation, operation, and commissioning.
These instructions are only valid for smd frequency inverters with software rev 20 (see drive nameplate).
Please read the instructions before commissioning.
Scope of delivery Important
• 1 smd inverter (ESMD...)
with EPM installed
(see Section 4.2)
• 1 Operating Instructions
After receipt of the delivery, check immediately whether the items
delivered match the accompanying papers. Lenze does not accept any
liability for deficiencies claimed subsequently.
Claim
• visible transport damage immediately to the forwarder.
• visible deciencies/incompleteness immediately to your Lenze
representative.
A
Certifications
B
Type
C
Input Ratings
D
Output Ratings
E
Hardware Version
F
Software Version
V0010
A
B
C
D
E
F
TYPE:
ESMD152X2TXA
ID-NO: 004 9 0 252
INPUT
OUTPUT
Made in USA
3/PE
230/240 V
7.9 A
50-60 Hz
3/PE
0-230 V
7.0 A
1.5 KW
0-240 HZ
For detailed information
refer to instruction
Manual: SX03
00490252012345678
ESMD152X2TXA000XX XX XX
To Next Page
Loading...