Index
821XKlimaBA0399 10-1
10 Index
A
Acceleration times, 5-4
Adapt the motor, 5-6
Analog plug-in module
Assembly, 4-6
Features, 3-9
Technical data, 3-9
Application, as directed, 1-2
Application conditions, 2-1
Application date, Display, 5-13
Application examples, 5-15
Air conditioning, 5-15
Pump application with level control, 5-20
Pump application with pressure control, 5-18
Applications as directed, 1-2
Approvals, 2-1
Assembly
Analog plug-in module, 4-6
With fixing rail, Types 821X, 4-3
Auto-TRIP reset, 8-5
C
Cable cross-sections, Single drives, 3-7
120 %overload, 3-7
150 %overload, 3-8
Code table, 7-2
Informationonthe,7-2
Commissioning, 5-1
Configuration, 7-1
Acceleration and deceleration times, 5-4
Basic information, 7-1
Code table, 7-2
Current-limit values, 5-5
Maximum field frequency, 5-3
Minimum field frequency, 5-3
Connection
Analog plug-in module, 4-15
Control, Connection diagram, 4-14
Control cables, 4-12
Mains, 4-8
Motor, 4-8
Power, Circuit diagram, 4-11
Connection diagram
Control connections, 4-14
Analog plug-in module, 4-15
Power connection, 4-11
Connections, Power, 4-8
Control cables, 4-12
Control connections, 4-12
Control mode, permissible, 5-6
Control terminals, 4-12
Survey, 4-12
Terminal assignment, 4-12
Controller, 1-1
Application as directed, 1-2
Labelling, 1-2
Current-limit values, 5-5
D
Deceleration times, 5-4
Definitions of terminology used, 1-1
Degree of pollution, 2-1
Derating, 5-5
Dimensions
821Xwith fixing rail, 4-3
Analog plug-in module, 3-10
Controller, 3-10
Display
Application date, 5-13
LED-, 8-1
Operating status, 8-1
Drive parameters, Factory setting, 5-2
Drive system, 1-1
E
Electrical installation, 4-7
Important notes, 4-7
EMC
Assembly, 4-16
CE-typical drive system, Installation, 4-16
Filters, 4-16
Grounding, 4-17
Installation, 4-16
Screening, 4-17
Enclosure, 2-1
To Next Page
Loading...