Lenze g500-B - QUICKON Connector

QUICKON connector
With the QUICKONconnectors, the mains connecon is available in a pluggable version with a
commonly used standard.
Nuts for QUICKON connecon
For fast and easy QUICKON connecon, the following nuts (counterparts) can be ed to the
connecng cable. No special tools are needed for installaon, only standard tools for stripping
the cable.
NOTICE
In case of mulple connecon frequency (>10 mes), a QUICKON V2 plug with nut must be
used instead of a QUICKON V2 nut.
QUICKON V2 components for cable cross-secon 1 ... 2.5 mm²
Order code Type
QUICKON V2 nut
EWS0103/M
•
Cable diameter: 6 ... 10 mm
•
Connecon frequency: max. 10
•
5 pieces
EWS0104/M
•
Cable diameter: 9 ... 14 mm
•
Connecon frequency: max. 10
•
5 pieces
QUICKON V2 connector with nut
EWS0105/M
•
Cable diameter: 6 ... 10 mm
•
Connecon frequency: ≥ 50
•
5 pieces
EWS0106/M
•
Cable diameter: 9 ... 14 mm
•
Connecon frequency: ≥ 50
•
5 pieces
QUICKON V2 H-distributor
EWS0110
•
Number of poles: 4
•
Connecon cross-secon: 2.5 mm²
•
Cable diameter: 6 ... 14 mm
•
Connecon frequency: ≥ 50
•
The scope of supply does not include QUICKON V2 nuts. These must be ordered
addionally (EWS0103/M, EWS0104/M).
QUICKON V2 T distributor
EWS0111
•
Number of poles: 4
•
Connecon cross-secon: 2.5 mm²
•
Cable diameter: 9 ... 14 mm
•
Connecon frequency: ≥ 50
•
Two QUICKON V2 nuts are included in the scope of supply. Others must be ordered
addionally (EWS0103/M, EWS0104/M).
QUICKON V2 socket wrench
EWS0112
•
Suitable for QUICKON V2 nuts EWS0103/M ... EWS0106/M
•
Wrench size: 22 mm
QUICKON V2 protecon cover
EWS0113
Suitable for QUICKON V2 distributor EWS0110, EWS0111
•
Degree of protecon: IP68
•
Eyelet for fastening
Accessories
QUICKON connector
109