Lenze G7 Series - Residual Hazards

Residual hazards
Even if notes given are taken into consideraon and protecve measures are implemented, the occurrence
of residual risks cannot be fully prevented.
The user must take the residual hazards menoned into consideraon in the risk assessment for his/her
machine/system.
If the above is disregarded, this can lead to severe injuries to persons and damage to property!
Product
Observe the warning labels on the product!
Dangerous electrical voltage:
Before working on the product, make sure there is no voltage applied to the power terminals!
Aer mains disconnecon, the power terminals will sll carry the hazardous electrical voltage for the me
given next to the symbol!
High leakage current:
Carry out xed installaon and PE connecon in compliance with:
EN 61800−5−1 / EN 60204−1
Hot surface:
Use personal protecve equipment or wait unl the device has cooled down!
Protecon of persons
DANGER!
Risk of injury and risk of burns from dangerous voltage
Power terminals may also carry voltage in the switched‐o state or when the motor is stopped and may
cause life-threatening cardiac arrhythmia and serious burns.
▶
Disconnect the product from the mains.
▶
Check that the power terminals are deenergized before starng work.
DANGER!
Risk of injury and risk of burns from dangerous voltage
The drive components may be live and can cause life-threatening cardiac arrhythmia and severe burns.
▶
Carefully earth components at the designated points.
WARNING!
Risk of injury due to rotang components
Rotang components can trap parts of the body and cause serious or fatal injuries.
▶
Wait unl the motor has come to a standsll before working on the drive system.
▶
Secure the motor against restarng and to prevent unwanted movements.
Safety instrucons
Residual hazards
36