Lenze i550-C0.25/120-1 - Mains Connection

Mains connecon
The following should be considered for the mains connecon of inverters:
Single inverters are either directly connected to the AC system or via upstream lters. RFI l-
ters are already integrated in many inverters. Depending on the requirements, mains chokes
or mains lters can be used.
Inverter groups are connected to the DC system with the DC bus. For this purpose, the inver-
ters have to be provided with a connecon for the DC bus, e. g. terminals +UG/-UG.
This enables the energy exchange in phases with operaon in generator and motor mode of
several drives in the network.
The DC system can be provided by power supply modules (AC/DC converters) or inverters with
a power reserve.
The technical data informs about the possible applicaons in the given groups. In the dimen-
sioning, data and further notes have to be observed.
Informaon on electrical installaon
Mains connecon
49