Need help?Do you have a question about the Lenze I55BE F Series and is the answer not in the manual?
General| Series | I55BE F Series |
|---|---|
| Category | Inverter |
| Power Range | 0.37 kW to 22 kW |
| Frequency Range | 0 to 599 Hz |
| Protection Class | IP20 |
| Ambient Temperature | -10°C to +50°C |
| Output Voltage | 3 AC 0 V to VIN |
| Cooling Method | Air cooled |
| Communication Interfaces | EtherCAT, PROFINET, EtherNet/IP, Modbus TCP |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
Provides a visual guide to the inverter's physical components and connections.
Lists fundamental safety precautions to prevent severe personal injury and property damage.
Highlights potential residual hazards like electrostatic charge, electrical voltage, and hot surfaces.
Presents physical dimensions, mounting details, and clearance requirements for inverter installation.
Illustrates exemplary connection diagrams for various voltage and power classes.
Instructions for connecting and using the keypad for inverter configuration.
Guides on initial setup and parameter configuration using terminal control for V/f characteristic.
Explains parameters related to motor control modes, identification, and calibration.
Explains how error messages are displayed on the keypad and their types (fault, trouble, warning).
Provides methods for resetting errors via the keypad or terminal control.
Lists specific error codes, their descriptions, classifications, remedies, and reset possibility.
To Next Page