Lenze I55BE230F10V1000LS

6
Safety instrucons
Operang Instrucons i550-Cabinet
2.2 Layoutofwarningnoces
Safety instrucons protect against injury to persons or damage to property. The measures
described for the prevenon of hazards must be complied with.
DANGER
Indicates an extremely hazardous situaon. Failure to comply with this instrucon will
result in severe irreparable injury and even death.
WARNING
Indicates an extremely hazardous situaon. Failure to comply with this instrucon may
result in severe irreparable injury and even death.
CAUTION
Indicates a hazardous situaon. Failure to comply with this instrucon may result in slight
to medium injury.
NOTE
Indicates a material hazard. Failure to comply with this instrucon may result in material
damage.
2.3 Residual hazards
The user must take the residual hazards menoned into consideraon in the risk assessment
for his/her machine/system.
If the above is disregarded, this may result in injuries to persons and material damage!
Product
Observe the warning labels on the product!
Icon Descripon
Electrostaccharge
Before working on the product, the sta must ensure to be free of electrostac charge.
Electrical voltage
Before working on the product, check if no voltage is applied to the power terminals!
Aer mains disconnecon, the power terminals carry the hazardous electrical voltage
given on the product!
High leakage current
Implement xed installaon and PE connecon!
Hot surface
Use personal protecve equipment or wait unl the device has cooled down!
Motor
In the event of a short circuit of two power transistors, a residual movement of up to 180°/
number of pole pairs on the motor may occur (e.g. 4-pole motor): residual movement max.
180 °/2 = 90°).