Lenze I95AE240F

Fusing data
Br
anch Circuit Protecon (BCP)
Short Circuit Current Rangs (SCCR) with Standard Fuses and Circuit Breaker
(Tested per UL61800-5-1, reference UL le E132659)
These devices are suitable for motor group installaon when used with Standard Fuses or
Circuit Breaker. For single motor installaon, if the fuse value indicated is higher than 400 % of
the motor current (FLA), the fuse value has to be calculated. If the value of the fuse is below
two standard rangs, the nearest standard rangs less than the calculated value shall apply.
Inverter Standard Fuses (UL248) Circuit Breaker (UL489)
Mains Rated power
Max.
SCCR
Max. rated current Class
Max.
SCCR
Max. rated current Min. cabinet dimensions
kW hp kA A kA A m³ ³
230 V, 1/3-ph 0.37 0.5 65 35 CC, CF, J, T 65 25 0.042 1.48
230 V, 1/3-ph 0.55 0.75 65 35 CC, CF, J, T 65 25 0.042 1.48
230 V, 1/3-ph 0.75 1 65 35 CC, CF, J, T 65 25 0.042 1.48
230 V, 1/3-ph 1.5 2 65 35 CC, CF, J, T 65 25 0.042 1.48
230 V, 3-ph 2.2 3 65 35 CC, CF, J, T 65 25 0.042 1.48
230 V, 3-ph 4 5 65 60 CC, CF, J, T 65 60 0.042 1.48
230 V, 3-ph 5.5 7.5 65 60 CC, CF, J, T 65 60 0.042 1.48
480 V, 3-ph 0.55 0.75 65 35 CC, CF, J, T 65 25 0.042 1.48
480 V, 3-ph 0.75 1 65 35 CC, CF, J, T 65 25 0.042 1.48
480 V, 3-ph 2.2 3 65 35 CC, CF, J, T 65 25 0.042 1.48
480 V, 3-ph 4 5 65 35 CC, CF, J, T 65 25 0.042 1.48
480 V, 3-ph 7.5 10 65 60 CC, CF, J, T 65 60 0.042 1.48
480 V, 3-ph 11 15 65 60 CC, CF, J, T 65 60 0.042 1.48
480 V, 3-ph 15 20 65 60 CC, CF, J, T 65 60 0.042 1.48
480 V, 3-ph 22 30 65 70 CC, CF, J, T 65 70 0.17 6
480 V, 3-ph 30 40 22 125 CC, CF, J, T 35 125 0.57 20
480 V, 3-ph 45 60 22 125 CC, CF, J, T 35 125 0.57 20
480 V, 3-ph 55 75 22 200 CC, CF, J, T 35 200 0.57 20
480 V, 3-ph 75 100 22 200 CC, CF, J, T 35 200 0.57 20
480 V, 3-ph 90 125 22 300 CC, CF, J, T 10 300 0.57 20
480 V, 3-ph 110 150 22 300 CC, CF, J, T 10 300 0.57 20
Short Circuit Current Rangs (SCCR) with Semic
onductor Fuses
(Tested per UL61800-5-1, reference UL le E132659)
These devices are suitable for standard installaon when used with Semiconductor Fuses. For
single motor installaon, if the fuse value indicated is higher than 400 % of the motor current
(FLA), the fuse value has to be calculated. If the value of the fuse is below two standard
rangs, the nearest standard rangs less than the calculated value shall apply.
Electrical ins
tallaon
Connecon according to UL
Fusing data
131