Product description
Application as directed
3
l
42
EDKRBS470R DE/EN/FR 10.0
3.2 Application as directed
Brake resistors
ƒ must only be actuated under the operating conditions specified in these
operating instructions.
ƒ are components
– for mounting in a machine.
– for assembly with other components to a machine.
Commissioning of the brake resistor is prohibited until it has been
determined that the machine into which the brake resistor is to be mounted
complies with the regulations of the EC Machinery Directive.
ƒ are electrical equipment for mounting in control cabinets or similar closed
electrical operating areas.
ƒ comply with the protective requirements of the "Low voltage" EC
Directive.
ƒ are not machines as defined by the Machines EC Directive.
ƒ are not household appliances, but are only designed as components for
subsequent commercial use.
Drive systems with brake resistors
ƒ The responsibility for compliance with the EC Directives in the machine
application is that of the re−user.
Any other use shall be deemed inappropriate!
To Next Page
Loading...
Need help?
General