Lenze MSEMA 080-32 Series - Page 13

Adjusng with a PC
With the EASY Starter engineering tool (expanded version, "EASY Advanced" or "Engineer
HighLe
vel" soware licence needed) can be used to adjust the Lenze Smart Products. The rel-
evant version can be easily downloaded from www.Lenze.com. As the sengs are very simple
and clear, there is an easy-to-use dialog box, which can be opened directly via the Navigator.
The corresponding buon is directly accessible in the Navigaon bar. Analogously to other
product sengs, the parameter values. can be archived.
Starng and stopping smoothly and gently
An
acceleraon ramp and – in contrast to a convenonal starter – a deceleraon ramp can be
set for Lenze Smart Products. This ensures that the conveyed material is handled in a dened
and jerk-free manner..
Contactor and motor protecon funcons integrated
The Lenze Smart Products can be started and stopped by mean of digital inputs. It is also pos-
sible to switch between dierent speeds and rotang direcons. Up to 5 dierent speed
modes (e.g. creep speed and normal speed in both direcons as well as stopping) can be used
for a motor. Reversing-contactor changes and pole changes are thus a thing of the past.
In addion, motor-protecons devices are not needed as monitoring of temperature, short
circuits, earth faults and phase failures has already been integrated.
Easy installaon
Connecon takes place completely from the outside by means of connectors.
The Lenze Smart Products come with an especially clever connecng technology – Phoenix
Contact QUICKON. Electrical installaon is therefore very easy without special tools and
requires less than one minute.
As a standard feature, the digital inputs and outputs are connected at M12 sockets of the type
currently available on the market.
Already exisng signal cables can oen be reused.
Worldwid and ecient
The drive can be used worldwide:
•
In all 3-phase ne
tworks with 400 ... 480 V and a supply voltage of 50 ... 60 Hz.
•
In ambient temperature of -30 ... +40 °C.
•
Is suitable for many approvals.
With IES2, the Lenze Smart Products full the highest eciency requirement.
If very lile torque is needed in the paral-load operaonal range, the integrated energy-sav-
ing funcon intervenes and improves the energy consumpon.
Product informaon
Product descripon
13