Lenze MSEMA 080-32 Series - Safety Instructions; Application as Directed

Safety
instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe
personal injury and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the precondi-
on for safe and trouble-free operaon and for obtaining the product features specied.
Please observe the specic safety informaon in the other secons!
Applicaon as directed
•
The pr
oduct must only be operated under the operang condions prescribed in this docu-
mentaon.
•
The product meets the
protecon requirements of 2014/35/EU: Low-Voltage Direc-
ve2014/35/EU: Low-Voltage Direcve.
•
The pr
oduct is not a machine in terms of 2006/42/EC: Machinery Direcve2006/42/EC:
Machinery Direcve.
•
Commissioning or starng the operaon as directed of a machine with the product is not
permied
unl it has been ensured that the machine meets the regulaons of the EC Direc-
ve 2006/42/EC: Machinery Direcve2006/42/EC: Machinery Direcve; observe
EN 60204−1EN 60204−1.
•
Commissioning or starng the operaon as directed is only allowed when there is compli-
ance with the EMC Direcve 2014/30/EU2014/30/EU.
•
The harmonised standard EN 61800−5−1EN 61800−5−1 is used for the inverters.
•
The product is not a household appliance, but is only designed as component for commer-
cial or professional use in terms of EN 61000−3−2EN 61000−3−2.
•
The product can be used according to the technical data if drive systems have to comply
with categories according to EN 61800−3EN 61800−3.
In residenal areas, the product may cause EMC interferences. The operator is responsible
for taking interference suppression measures.
•
The harmonised s
tandard IEC/EN 60034 is used for the three-phase motors.
•
Do not use the built-in brakes as fail-safe brakes. Disrupve factors that cannot be inu-
enced can cause the brake torque to be reduced.
Project planning
Sa
fety instrucons
Applicaon as directed
21