Lenze MSEMA 080-32 Series - Equipment

Applicaon examples
Belt ejectors Belt conveyors
Equipment
The equipment includes all extensions of the product that are available as standard features.
The output side (see picture) of the gearbox includes a hollow sha and a ange that is inte-
gr
ated in the housing and that has threaded holes and a centering feature.
Oponally, a solid sha that can be inserted into the hollow sha as well as a second ange
easily mounted with four screws or a torque plate are available.
If there are dierent mechanical connecons in your machine, the drive can adapted locally
so that the number of dierent materials is reduced.
Torque plate
Output flange
Brake resistor
QUICKON connector
X3 mains connection
Via PC with NFC adapter
Via Smartphone
Adjustment of speeds
M12 connector
X1, X2 control connection
Standard
Spring-applied brake
centering
Threaded pitch circle with
Housing type
Solid shaft can be inserted
Hollow shaft
Output shaft
Integral fan
Cooling
PE
Internal: MSEMA□□063
External: MSEMA□□080
Product
informaon
Product descripon
14