Lenze Smart Motor m300 - Accessories; NFC Adapter

Accessories
NFC adapter
The sengs of the Lenze Smart Products can be made with an NFC-capable Android
smartphone or a PC. If a PC is used to make the sengs, the »EASY Starter« engineering tool
must be used to do this (»EASY Advanced« soware licence). Communicaon takes place via
the NFC adapter. The adapter is connected to the PC at the USB interface.
NFC adapter
Version VPE Order code
Piece
Voltage supply on the input side via USB connecon of the PC
Diagnosc LEDs
hot-plug-capable
1 EZAETF001
Accessories
NFC adapter
49