EasyManua.ls Logo

Lenze Smart Motor m300 - Enclosures

Lenze Smart Motor m300
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Intermient operaon S3 Non-intermient periodic operaon S6
P
P
V
t
t
t
J
t
S
t
L
t
B
P
P
V
t
t
t
J
t
S
t
L
t
B
Sequence of idencal duty cycles comprising operaon with a constant
load and subsequent standsll. Start-up and braking processes do not
have an impact on the winding temperature. The steady-state is not
reached. The guide values apply to a cycle duraon of 10 minutes. The
power increase depends on the cycle duraon and on the load period/
downme rao.
Sequence of idencal duty cycles comprising operaon with a constant
load and subsequent no-load operaon. The motor cools down during
the no-load phase. Start-up and braking processes do not have an
impact on the winding temperature. The steady-state is not reached. The
guide values apply to a cycle duraon of 10 minutes. The power increase
depends on the cycle duraon and on the load period/idle me rao.
P Power P
V
Power loss
t Time t
B
Load period
t
L
Idle me t
S
Cycle duraon
ϑ Temperature
Enclosures
The protecon class indicates the suitability of a product for specic ambient condions with
regard to humidity as well as the protecon against contact and the ingress of foreign
parcles. The protecon classes are classied in the EN 60034-5/ EN IEC 60529.
The rst code number aer the code leers IP indicates the protecon against the ingress of
foreign parcles and dust. The second code number refers to the protecon against the
ingress of humidity.
Code number 1 Degree of protecon Code number 2 Degree of protecon
0 No protecon 0 No protecon
1 Protecon against the ingress of foreign parcles d >
50 mm. No protecon in case of deliberate access.
1 Protecon against vercally dripping water (dripping
water).
2 Protecon against medium-sized foreign parcles,
d > 12 mm, keeping away ngers or the like.
2 Protecon against diagonally falling water (dripping
water), 15 ° compared to normal service posion.
3 Protecon against small foreign parcles d > 2.5 mm.
Keeping away tools, wires or the like.
3 Protecon against spraying water, up to 60 ° from
vercal.
4 Protecon against granular foreign parcles, d > 1 mm,
keeping away tools, wire or the like.
4 Protecon against spraying water from all direcons.
5 Protecon against dust deposits (dust-protected),
complete protecon against contact.
5 Protecon against water jets from all direcons.
6 Protecon against the ingress of dust (dust-proof),
complete protecon against contact.
6 Protecon against choppy seas or heavy water jets
(ood protecon).
Appendix
Good to know
Enclosures
56

Other manuals for Lenze Smart Motor m300

Related product manuals