Lenze x510 - Safety Instructions; Basic Safety Instructions; Application as Directed; Handling

Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe personal injury
and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the precondion for safe
and trouble-free operaon and for obtaining the product features specied.
Please observe the specic safety informaon in the other secons!
Basic safety instrucons
Personnel
Only qualied and skilled personnel are allowed to work with the product. IEC 60364 and/or
CENELEC HD 384 dene the qualicaons of these persons as follows:
•
They are familiar with the installaon, mounng, commissioning, and operaon of the product.
•
They possess the appropriate qualicaons for their tasks.
•
They are familiar with all regulaons for the prevenon of accidents, direcves, and laws applicable at the
locaon and are able to apply them.
Product
The product must never be technically modied!
If you carry out any technical modicaons or alteraons that are impermissible, all your warranty claims
will become void and the product liability will be excluded!
Device protecon
•
The maximum test voltage for insulaon tests between a control potenal of 24 V and PE must not
exceed 110 V DC.
Applicaon as directed
The product is a piece of electrical equipment. The product is solely suited to be installed in control cabinets
or similar closed electrical operang areas, and to implement control concepts, operaonal concepts, or to
represent informaon in customary industrial and commercial areas.
Handling
•
Connect/disconnect all pluggable terminals only in de-energized condion.
•
Only remove the product from the installaon in the deenergized state.
Safety instrucons
Handling
21