Lenze x510 - Commissioning

Commissioning
Operang interfaces
X4 Remote Plaorm
Precondions
•
The mechanical and electrical installaon of the IoT Gateway x500 is completed.
•
The IoT Gateway x500 is supplied with voltage.
•
The diagnoscs of the IoT Gateway x500 does not show any interference.
Commissioning
How to carry out the commissioning:
1. Create account
Create an account on the X4 Remote Plaorm and congure your own IoT user and company account at
hps://iot.lenze.digital/login. hps://iot.lenze.digital/login.
2. Congure IoT Gateway x500
a) Create the conguraon le for the IoT Gateway x500 on your account.
b) Select Tools > Start conguraon to start the wizard.
c) Save the conguraon le to the USB data carrier included in the scope of supply using the le name
router.conf.
3. Connect IoT Gateway x500 to the cloud.
Insert the USB data carrier into the USB port.
The IoT Gateway x500 registers on the X4 Remote Plaorm and sets up a safe VPN connecon.
Commissioning
30