Choose WAN Type
This option is primary to enable this product to work properly. The setting items and the web appearance
depend on the WAN type. Choose correct WAN type and “Save” before you start.
1. LAN IP Address: the local IP address of this device. The computers on your network must use the LAN
IP address of your product as their Default Gateway. You can change it if necessary.
2. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from
the following four options:
A. Static IP Address: ISP assigns you a static IP address.
B. Dynamic IP Address: Obtain an IP address from ISP automatically.
C. Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)
D. PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
E. PPTP: Some ISPs require the use of PPTP to connect to their services.
F. L2TP: Some ISPs require the use of L2TP to connect to their services.
14
To Next Page
Loading...
