4.6.4 MAC Address Control
MAC Address Control allows you to assign different access right for different users and to assign a specific IP
address to a certain MAC address.
MAC Address Control Select “Enable” to enable the “MAC Address Control”. All of the settings in
this page will take effect only when “Enable” is checked.
Connection control Select "Connection control" to enable the controlling of which wired can connect to
this device. If a client is denied to connect to this device, it means the client can't
access to the Internet either. Choose "allow" or "deny" to allow or deny the clients,
whose MAC addresses are not in the "Control table" (please see below), to
connect to this device.
37
To Next Page
Loading...
