Advanced
Enable or configure other network functions.
NTP: Configure a NTP (Network Time Protocol) server, so that the device system date and time can be
synchronized with a specified Time Server or DHCP server.
HTTP: set the HTTP port that will be applied for Web UI access.
RTSP: set the RTSP (Video) port for video data transmission.
Bonjour: Enable Bonjour service, so that the device can be discovered with “Bonjour” service applied.
UPnP: Enable UPnP, so that the device can be discovered in an UPnP Compliant Network.
NAT Traversal: Enable NAT traversal, so that client from Internet can have access to the devices behind
the Router.
Note: with UPnP enabled, the IP Sharing device (Router) capable of UPnP function will automatically be
noticed with the device’s NAT port.
To Next Page
Loading...
