Need help?Do you have a question about the LevelOne FCS-0071 and is the answer not in the manual?
General| Brand | LevelOne |
|---|---|
| Model | FCS-0071 |
| Category | Security Camera |
| Language | English |
Overview of the camera's physical components and ports.
Steps for physically connecting the camera to the network and power.
Instructions for installing necessary software like IP Installer and codecs.
Essential steps before assigning an IP address, including consulting administrators.
Step-by-step guide on using the IP Installer utility to configure network settings.
How to change network parameters like IP address, subnet mask, and gateway using the utility.
Steps to access the camera's web interface using the IP installer.
Completing browser-based installation, including ActiveX control setup.
Introduction to the live view interface and its primary controls.
Accesses general/advanced camera settings for further configuration.
Configures OSD (On-Screen Display) settings like camera name and date/time.
Configures advanced video stream settings, including RTSP, resolution, and frame rates.
Adjusts image properties like brightness, hue, saturation, contrast, sharpness, and audio.
Configures white balance, exposure, IR filter, day/night threshold, and camera mount.
Compensates image color based on ambient light conditions.
Adjusts image sensor settings to match light source frequency (e.g., 50Hz/60Hz).
Manages IR light for color accuracy or low-light surveillance.
Defines lux level for switching between day and night modes.
To Next Page