User's Manual - 19
Multiple devices information
Firmware Information
The selected rmware information will show the information about the le that you selected.
Firmware version: The version number of the selected rmware.
Select Firmware
You can use the “Select rmware” button to browse the le that you want upgrade onto the se-
lected device(s). After selected the le, Installation Wizard will check whether the le you select-
ed is correct. If it’s the correct version, then the package information will display the information
about the le and enable the “Start Upgrade” button. Therefore you can click on the button to
upgrade the rmware. If not, then it will be a pop-up warning message.
Select rmware
To Next Page
Loading...
