Need help?Do you have a question about the LevelOne FCS-5042 and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Aperture | F2.0 |
| Night Vision | Yes |
| Day/Night | Yes |
| Lens Type | Fixed |
| Minimum Illumination | 0 Lux (IR on) |
| Video Compression | H.264 |
| Frame Rate | 30fps |
| Protocols | TCP/IP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP |
| Power Supply | DC 12V |
| Operating Temperature | -10°C ~ 50°C |
Explains how to connect the camera using PoE for power and data transmission.
Guides on installing the software to locate the camera's IP address on the network.
Settings for choosing communication protocols (UDP, TCP, HTTP) for intranet connections.
Settings for choosing communication protocols (UDP, TCP, HTTP) for internet connections.
Instructions for managing user accounts, passwords, and access privileges for enhanced security.
Configuration options for network type, IP address, ports, and DDNS.
Controls access permissions by verifying client PC IP addresses.
Process for updating the camera's firmware to the latest version.
Provides solutions to common issues and answers to typical user inquiries.
Step-by-step guide to enable UPnP for automatic port forwarding through routers.
To Next Page