Need help?Do you have a question about the LevelOne FCS-4042 and is the answer not in the manual?
Adhere to all warnings on the product and in the manual to avoid danger or damage.
Do not attempt self-servicing; refer to qualified service personnel.
Do not attempt self-servicing; refer to qualified service personnel.
Disconnect power and refer to qualified personnel for damaged cord, liquid spills, or abnormal operation.
Connects to digital input/output devices for alarm triggers, motion detection, etc.
Steps for physically mounting the camera, including using mounting solutions.
Detailed steps for waterproofing cable connections using a cable gland.
Detailed steps for waterproofing cable connections using a conduit gland.
How to set up IP addresses for communication between the camera and PC.
Adhere to all warnings on the product and in the manual to avoid danger or damage.
Do not attempt self-servicing; refer to qualified service personnel.
Do not attempt self-servicing; refer to qualified service personnel.
Disconnect power and refer to qualified personnel for damaged cord, liquid spills, or abnormal operation.
Connects to digital input/output devices for alarm triggers, motion detection, etc.
Steps for physically mounting the camera, including using mounting solutions.
Detailed steps for waterproofing cable connections using a cable gland.
Detailed steps for waterproofing cable connections using a conduit gland.
How to set up IP addresses for communication between the camera and PC.
General| Sensor Type | CMOS |
|---|---|
| Operating Temperature | -10°C to 50°C |
| Infrared Cut Filter | Yes |
| Day/Night | Yes |
| Lens Type | Fixed |
| Focal length | 3.6mm |
| Field of View | Horizontal: 87°, Vertical: 47°, Diagonal: 104° |
| Night Vision | Yes |
| Video Compression | H.264 |
| Audio Support | Two-Way Audio |
| Power Supply | DC 12V |
| Connectivity | Ethernet |
| Minimum Illumination | 0.01 Lux |
| Signal to Noise Ratio | >50dB |
To Next Page