Hardware Manual
34
How to Use the Power Adapter
1. Slide the voltage switch to set the adapter voltage according to the voltage standard in your
location.
2. Connect the power cord to the power adapter.
3. Connect the power connector of the camera to the cable connector of the adapter.
How to Replace the Fuse
With proper use, there is no need to replace the fuse that came with the power adapter. However
in case of accidentally switching the wrong power voltage, a replacement fuse is already included.
Follow the procedures below to replace the fuse:
1. Use a flat-head object, such as a screwdriver, to pull and remove the fuse holder from the
power adapter.
To Next Page
Loading...
