LevelOne FVM-1101 User Manual

11
“refresh” button, show the current MIB counters again.
5.9 SNMP Configuration
This page could configure SNMP functions.
SNMP Ability: Enable or Disable SNMP functions.
Trap Mode: If enable, SNMP could send trap event to SNMP server.
SNMP Trap IP Address: SNMP Server’s IP address, used for trap destination IP.
5.10 VLAN
5.10.1 VLAN Group
If enable VLAN functions, user could set 16 VLAN entries. Each VLAN entry could set VID and member port. The
VID should be 1~4094.

LevelOne FVM-1101 Specifications

General

Brand	LevelOne
Model	FVM-1101
Category	Media Converter
Language	English