LevelOne USB-0301 User Manual

2. Installation
7
On Mac

Operating Systems
1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD
and navigate to the directory of [\Driver\Mac]
2. Click the [AX88772.dmg], the following [DISK IMAGE] virtual disk will be
appeared on the Desktop of your Mac OSX system. (This “DISK IMAGE”
virtual disk will be auto-removed after rebooting Mac OSX system.)
3. Click the [AX88772_v3.5.0.pkg], the following driver setup dialog will appear.
Click the [Continue] button to start the installation operation and follow the
instructions to continue the installation.

LevelOne USB-0301 Specifications

Network Specifications

network standards	IEEE 802.3: 10Base-T, IEEE 802.3u: 100Base-T
data transfer rates	Ethernet: 10Mbps (Half/Full Duplex), Fast Ethernet: 100Mbps (Half/Full Duplex)
network interface	Female RJ45 jack

Power

power consumption	850mW
power management	Suspend mode, hibernation mode

Operating Environment

operating system support	Windows® 2000, XP, Vista™, Windows®7; Mac OS X 10.x
operating temperature	0°C to 70°C

System Memory

RAM	Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering

Weight and Dimensions

dimensions	66 mm x 22 mm x 15 mm
weight	25g