P 4-1-4 Wireless Basic Info
4.2.5 Wireless Advanced
Wireless advanced setting mainly for AP’s wireless parameters, including Device List; Mode; Channel; Client isolation;
Coverage Threshold; Max Station
P 4-1-5 Wireless Advanced Setting
Device List: Display the AC controller is manage 2.4G wireless devices AP
Mode: This mode is used to set up the mode of Wireless Access Point, recommended 11b / g / n 20MHz mode.
Channels: channel range, FCC default is 1-11, ETST default 1-13
Client Isolation: The option is to make the host cannot communicate with each other on a different SSID's if this option Enable.
Coverage threshold: You can set the threshold to achieve wireless signal roaming
Max Station: mean number of end users can access into wireless AP.
(The default is 32 mean 32 end users can access int this wireless AP, 0 mean unlimited).
To Next Page
Loading...
