Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client
stations can roam freely over this product and other Access Points that have the same
Network ID. (The factory setting is “default”)
SSID Broadcast: The router will Broadcast beacons that have some information, including
ssid so that
The wireless clients can know how many ap devices by scanning function in the network.
Therefore, This function is disabled, the wireless clients can not find the device from beacons.
Channel: The radio channel number. The permissible channels depend on the Regulatory
Domain.
Security: Select the data privacy algorithm you want. Enabling the security can protect your
data while it is transferred from one station to another.
Remote AP MAC : Choose “Manual” or scan one AP to copy to item1~4.
To Next Page
Loading...
