MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
MAC Address Control Check “Enable” to enable the “MAC Address Control”. All of
the settings in this page will take effect only when “Enable” is
checked.
Connection control Check "Connection control" to enable the controlling of which wired
and wireless clients can connect to this device. If a client is denied
to connect to this device, it means the client can't access to the
Internet either. Choose "allow" or "deny" to allow or deny the clients,
whose MAC addresses are not in the "Control table" (please see
below), to connect to this device.
To Next Page
Loading...
