Activate Instructions
1. Flip on the power switch or tap any button to wake
your LĒVO C.
2. Remove the glass basin from the machine base by
carefully lifting it o the heat plate; then remove the
basin's lid by gently lifting upwards.
3. Remove your Herb Pod and add your ingredients.
Take care to not pack too tightly. With the silicone cap
securely in place, hang your lled Herb Pod on the glass
basin away from the basin lip. Place the lid on the basin
ensuring the cutout on the lid is aligned with where
you have suspended the Herb Pod.
4. Press ACTIVATE to select the Activate cycle.
Note: LĒVO C will automatically display the default time
and temperature for ACTIVATE. (240°F/116°C for 45
minutes). These default settings cannot be further
customized, however the cycle can be stopped early or
repeated again for desired results. We recommend
running the ACTIVATE cycle once for a half-full pod
and twice for a full pod. Stir around & redistribute the
herb between cycles to ensure even cooking.
5. Press START.
The Silicone Stirrer is not
needed for Activate cycles—we
recommend removing it and
adding back before you infuse.
10
To Next Page
Loading...
Need help?
General
